NASA’s James Webb Space Telescope
NASA’s successor to the Hubble Space Telescope, the James Webb Space Telescope, launches in 2018 and will peer back to discover the mysteries of the Big Bang. See photos of the space observatory’s construction in our gallery here. (This slideshow, originally posted in August 2012, was updated Dec. 10, 2016).
Engineer and James Webb Space Telescope Mirror Segments
NASA engineer Ernie Wright holds a dramatic pose in front of the first six flight-ready James Webb Space Telescope’s primary mirror segments at NASA’s Marshall Space Flight Center. Engineers began final round-the-clock cryogenic testing on the mirrors before integrating them into the telescope’s structure.
Webb Telescope’s Fine Guidance Sensor Moved into Position
It takes a lot of guidance to correctly move flight instruments. Critical lift operations involving flight instruments require patience, precision, and many pairs of eyes. This photo shows a number of them who are all involved in the operations of the Fine Guidance Sensor/Near InfraRed Imager and Slitless Spectrograph (FGS/NIRISS). Photo taken on August 7, 2012.
NIRSpec Microshutters for James Webb Space Telescope
Microshutters are a new piece of technology being used on the Near Infrared Spectrograph (NIRSpec) instrument on Webb. NIRSpec is an instrument that will allow scientists to capture the spectra of more than 100 objects at once. Because the objects NIRSpec will be looking at are so far away and so faint, the instrument needs a way to block out the light of nearer bright objects. Photo taken June 23, 2012.
The MIRI Cleanroom Huddle
The MIRI Cleanroom Huddle: Although it appears that these six contamination control engineers are in a huddle around the James Webb Space Telescope’s Mid-Infrared Instrument (or MIRI), they are conducting a receiving inspection. The instrument was delivered to NASA on May 29, 2012.
Testing the Webb Telescope
Several critical items related to NASA’s next-generation James Webb Space Telescope currently are being tested in the thermal vacuum test chamber at NASA’s Goddard Space Flight Center, Greenbelt, Md. Image released April 30, 2012.
The James Webb Space Telescope Backplane Pathfinder
A technician examines the backplane pathfinder – a flight-like model of the center section of the Webb telescope backplane used to practice assembly and integration before the flight hardware is done. The gray fixture on top of the backplane is the backplane support fixture. Photo taken on April 30, 2012.
James Webb Space Telescope’s Sunshield Membrane
A full-scale JWST sunshield membrane deployed on the membrane test fixture at Mantech, Hunstville, ready for a precise measurement of its three dimensional shape. Photo taken on September 14, 2011.
NIRSpec Cryotank
Cryotank being prepared for installation of NIRSpec. Photo taken on July 21, 2011.
James Webb Space Telescope Secondary Mirror
The James Webb Space Telescope secondary mirror just after gold coating at Quantum Coating Incorporated. Photo taken on July 19, 2011.
The ISIM Structure on the Centrifuge
The Integrated Science Instrument Module (ISIM) structure on the centrifuge for testing at NASA’s Goddard Space Flight Center. It has just started spinning. Photo taken on May 24, 2011.
Primary Mirror Segment Cryogenic Testing
Project scientist Mark Clampin is reflected in the flight mirrors at Marshall Space Flight Center. Photo taken on April 15, 2011.
Gold-Coated Primary Mirror Segment
Ball Aerospace optical technician Scott Murray inspects the first gold primary mirror segment, a critical element of NASA’s James Webb Space Telescope, prior to cryogenic testing in the X-ray & Cryogenic Facility at NASA’s Marshall Space Flight Center in Huntsville, Ala. The mirror was coated in gold by by Quantum Coating Incorporated. Photo taken on September 1, 2010.
James Webb Space Telescope Tertiary Mirror
Webb’s coated flight tertiary mirror. Dan Patriarca, President of Quantum Coating Incorporated, is in the photo. Photo taken on June 22, 2010.
Space Systems Development and Integration (SSDIF) Cleanroom at NASA’s Goddard Space Flight Center
This panorama shows the inside of the Space Systems Development and Integration (SSDIF) cleanroom at NASA’s Goddard Space Flight Center, as seen from the observation deck. Photo taken on July 20, 2010.
Integrated Science Instrument Module Structure
Goddard technicians lifting the ISIM (Integrated Science Instrument Module) onto the ITS (ISIM Test Structure). ISIM will sit atop this platform during space environmental testing. Photo taken on July 20, 2010.
James Webb Space Telescope Backplane
Northrop Grumman workers preparing James Webb Space Telescope backplane in the clean room. Photo taken on July 20, 2010.
Huge Sun Shield Built for Space Telescope
The sun shield created for the James Webb Space Telescope will reach the size of a tennis court.
JWST’s Mid-InfraRed Instrument (MIRI)
The Mid-InfraRed Instrument (MIRI) on board the James Webb Space Telescope will be used by astronomers to study faint comets circling the Sun, newly born faraway planets, regions of obscured star formation, and galaxies near the edge of the universe. It must work at extremely low temperatures, of just 7 K above absolute zero or -266 °C. Here, MIRI is being placed in the thermal test chamber at RAL Space, Oxfordshire, UK.
James Webb Space Telescope Inspection
An engineer inspects the JWST’s primary mirror segments at NASA’s Marshall Space Flight Center in Huntsville, Ala.
New Space Telescope Mirrors Get Frosty Treatment
During cryogenic testing, the mirrors will be subjected to temperatures dipping to -415 degrees Fahrenheit, permitting engineers to measure in extreme detail how the shape of each mirror changes as it cools.
NASA’s Next Big Space Telescope Passes Brain Test
Through a process called “Wavefront Sensing and Control,” or WFSC, software aboard the James Webb Space Telescope will compute the best position for each of 18 mirrors and one secondary mirror, and then adjust the positions. Engineers used a 1/6 scale model to test the WFSC software.
“GO GIRL SCOUTS” Engraved on NIRCam
NIRCam’s flight modules are now fully assembled and engraved permanently with “Go Girl Scouts” to honor our close partners in STEM education. Girl Scouts along with NIRCam’s scientists, educators, and engineers are going together into space to benefit life on Earth. Photo taken on November 2, 2007
James Webb Space Telescope’s Instrument Suite
The James Webb Space Telescope’s instrument suite being lowered into the cryogenic chamber at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
James Webb Space Telescope’s Mirrors
A rare view shows all 18 mirrors installed on the James Webb Space Telescope structure at NASA’s Goddard Space Flight Center in Greenbelt, Maryland.
James Webb Space Telescope Mirror Assembled
In a clean room at NASA’s Goddard Space Flight Center in Greenbelt, Maryland, a robotic arm installs the last of 18 mirrors onto the James Webb Space Telescope structure.
James Webb Space Telescope test
Engineers conduct a “Center of Curvature” test on NASA’s James Webb Space Telescope in the clean room at NASA’s Goddard Space Flight Center, Greenbelt, Md.
James Webb Telescope Curvature Test
The James Webb Space Telescope is completed and entering a two-year testing phase, NASA officials announced Nov. 2; it is on schedule to launch in October 2018. Here, technicians complete a center of curvature test at Goddard Space Flight Center in Maryland.
James Webb Space Telescope Mirror
The golden mirrors of NASA’s Names Webb Space Telescope are seen in this image inside the clean room at the space agency’s Goddard Space Flight Center. The space telescope is undergoing testing ahead of its 2018 launch.
Let’s block ads! (Why?)
http://www.space.com/17142-james-webb-space-telescope-photos.html Building the James Webb Space Telescope: Hubble's Successor (Gallery)
[bestandroiddoubledinheadunit950.blogspot.com]Building the James Webb Space Telescope: Hubble’s Successor (Gallery)
No comments:
Post a Comment